HOBBYWING EZRUN 7800 KV 12T Brushless Motor & 18A ESC Speed Controller CA064

USD44.9USD45.9 (-2%)

Out of stock

HOBBYWING EZRUN 7800 KV 12T Brushless Motor & 18A ESC Speed Controller CA064. This is 100% Brand new item and we can ship this item to worldwide.

Motor Specifications
Rotational Speed: 7800 KV
Motor Dimensions (Diameter x Length): 20mm x 30mm
Shaft Dimensions (Diameter x Length): 1.97mm x 12mm
Input Battery Types: NiCd/ Nimh/ Li-po Battery
Recommend Model: 1:18 or 1:24 RC Model Car

ESC Introduction
Thanks for purchasing ‘eZRun’ series Electronic Speed Controller (ESC). High power system for RC model can be very dangerous, so we strongly suggest you read this manual carefully. In that we have no control over the correct use, installation, application, or maintenance of our products, no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of the product. Any claims arising from the operating, failure of malfunctioning etc. will be denied. We assume no liability for personal injury, consequential damages resulting from our product or our workmanship. As far as is legally permitted, the obligation to compensation is limited to the invoice amount of the affect product.

ESC Specifications
ESC Model: 18A-SL
Dimensions: 31.5mm x 24mm x 15mm
Continuous Current: 18A
Burst Current: 50A
Resistance: 0.01 ohm
BEC Ouput: 6V/1A
Suitable Brushless Motor: >12T 12t motor: brushless> > >
Working Battery Types: 4 – 9 Cells (NiMh or Nicd), 2 – 3 Cells (Li-Po)
Working Voltage 4.8 – 10.8V (NiMh or Nicd), 7.4 – 11.1V (Li-Po)
User Programmable: Available
Cable Type: 18 AWG (Battery), 18 AWG (Motor)
Cable Length: 95mm (Battery), 82mm (Motor), 110mm (Receiver)
Recommend Model: RC Model Car

ESC Features
Specially designed for RC car, with excellent start-up, acceleration and linearity festures.

Compatible with sonsorless brushless motor.

Use top quality electronic components to enhance the current endurance ability of the ESC.

2 running modes (Racing mode and Forward/Backward mode).

4 steps of maximum reverse force adjustment.

Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.

4 start modes (Also called ‘Punch’) from ‘soft’ to ‘very aggressive’.

Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.

8 steps of timing adjustment.

Easily program with only one button and compatible with pocket-sized program card.

Program Card Introduction
Thank you for interesting the program card for the electronic speed controller. The program card has a friendly user interface, so you can easily set programmable parameters of the ESC with this device. It is pocket- sized, so you can bring it to the racing field conveniently.

Program Card Specifications
Dimensions: 88mm x 58mm x 14mm

Programmable Items
Running Model
‘Forward with brake’ mode, provides forward and brake functions.
‘Forward / Reverse with brake’ mode, provides forward, backward and brake functions.

Drag Brake Force
When the throttle stick is moved from the forward range to the neutral rang, a bit brake force happened. That simulates the slight Braking effect of a neutral brushed motor while coasting. This has 8 options, from 0% to 40% with the increased drag brake force.

Low Voltage Cut-Off
The function is mainly to prevent the lithium battery pack from over discharging. When using lithium battery pack, please set the suitable value for low-voltage protection as you like.

Start Mode
Soft / Normal / Aggressive / Very Aggressive

Maximum Brake Force
It refers to the force when the throttle stick is located at the top point of the backward zone. A very large brake force can shorten the brake time, but it may damage the gears. This item has 4 options from 25% to 100% with the increased maximum brake force.

Maximum Reverse Force
Different value makes different reverse speed. This item has 4 options from 25% to 100% with increased maximum reverse force.

Initial Brake Force
It is also so-called ‘minimum brake force’ and it refers to the force when the throttle stick is located at the initial position of the backward zone.

Throttle Neutral Range
This item is used to set the throttle neutral range, so that can be compatible for habit of different of user. This item has 3 options from 6% to 12% with the increased neutral range.

This parameter is ONLY available for sensorless brushless motor. Different timing value is compatible for the sensorless brushless of different structures or features. This item has 8 options, from 0 degree to 26.25 degree.

Over-Heat Protect
If the function is activated, the output power will be cut-off when the temperature of ESC is higher than a particular value.

Package Included
1 x TEKMODEL 7800 KV 12T Brushless Motor (with English Manual)
1 x 18A Brushless ESC (with accessories & English Manual)
1 x Program Card (with English Manual)



Additional information

Weight207 g
Dimensions15 × 10 × 5 cm
Submit your review

Your email address will not be published. Required fields are marked *


  1. by violetrose06

    Great seller A+++++

  2. by szpesz2

    Works fine!

  3. by vigore27

    très bien merci

  4. by exemplar01

    Excellent quality, thanks

  5. by my-stig

    good RCECHO item

  6. by harfleet

    Perfect thank you!! A faultless transaction!! Very well packaged!!

  7. by slicktmi

    exellent customer service !!! fast reply A+++++ Thank you

  8. by modellbauprofi72

    Alles ok Jederzeit wieder !!!

  9. by d_dimon_v2012


  10. by mbg-nw”>d_dimon_v2012</span></a> <span class="

    Positive feedback rating”>


    by h***0

    As description cheers 🙂

See It Styled On Instagram

    Instagram did not return a 200.
Select your currency
EUR Euro
USDUnited States (US) dollar

Main Menu