HOBBYWING EZRUN RC Model Brushless Motor 80A ESC Speed Controller for 1/8 (Used)

Item State
Condition: Used
Performance: Good
Source: Shop Example Item
Length of Battery Wires: 95mm (approximately)
Length of Motor Wires: 125mm (approximately)
Oraginal Package: None
Product Manual: None


Specification
Model: EZRUN-80A
Dimension: 68mm(L) x 55mm(W) x 45mm(H)
Cont. / Burst Current: 150A / 380A
Resistance: 0.0006 ohm
Suitable Motor: =>6T, KV<=2400 (The 80A ESC works with 4S Li-Po)
Battery: 6-12 cells NiMH or 2-4 cells Li-Po
BEC Output: 5.75V/3A Switch mode built-in BEC
Cooling Fan Working Voltage: 5V, max. 8V (The fan gets the power supply from the built-in BEC)
Suitable Model: 1/8 on-road, monster, RTR application

Features
Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao Etc.

Excellent start-up, acceleration and linearity features.

3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately).

4 steps of maximum reverse force adjustment.

Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.

9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.

Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.

8 steps of timing adjustment by software. You can even use this programmable item to adjust the timing value even for a sensored brushless motor. (Traditionally, you must turn the rear cover of the motor to change the timing value for a sensored brushless motor).

Built-in switch mode BEC has a powerful output to supply all the electronic equipments.

Firmware can be updated through an USB adapter (Optional equipment).

Splash proof and dustproof.