No products in the cart.
HOBBYWING EZRUN RC Model Brushless Motor 80A ESC Speed Controller for 1/8 (Used)
Out Of Stock
Roll over image to zoom in
Click to open expanded view
The HOBBYWING EZRUN RC Model Brushless Motor 80A ESC Speed Controller for 1/8 (Used) is a high-performance speed controller designed for use with brushless motors in R/C hobby applications. This speed controller is used but in good condition, and features a maximum current of 80A, making it suitable for a wide range of applications. The EZRUN 80A ESC is compatible with a wide range of 1/8 scale R/C models, and is an essential component for any serious hobbyist or enthusiast. HOBBYWING EZRUN RC Model Brushless Motor 80A ESC Speed Controller for 1/8 (Used). This is 100% Brand new item and we can ship this item to worldwide.
Source: Shop Example Item
Length of Battery Wires: 95mm (approximately)
Length of Motor Wires: 80mm (approximately)
Oraginal Package: None
Product Manual: None
Dimension: 68mm(L) x 55mm(W) x 45mm(H)
Cont. / Burst Current: 150A / 380A
Resistance: 0.0006 ohm
Suitable Motor: =>6T, KV<=2400 (The 80A ESC works with 4S Li-Po)
Battery: 6-12 cells NiMH or 2-4 cells Li-Po
BEC Output: 5.75V/3A Switch mode built-in BEC
Cooling Fan Working Voltage: 5V, max. 8V (The fan gets the power supply from the built-in BEC)
Suitable Model: 1/8 on-road, monster, RTR application
Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao Etc.
Excellent start-up, acceleration and linearity features.
3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment by software. You can even use this programmable item to adjust the timing value even for a sensored brushless motor. (Traditionally, you must turn the rear cover of the motor to change the timing value for a sensored brushless motor).
Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
Firmware can be updated through an USB adapter (Optional equipment).
Splash proof and dustproof.
|Dimensions||25 × 20 × 10 cm|