No products in the cart.
HOBBYWING EZRUN TEKMODEL RC Brushless Motor 60A ESC (Used)
Roll over image to zoom in
USD26.9
The HOBBYWING EZRUN RC Brushless Motor 60A ESC (Used) is a high-quality electronic speed controller designed for use with RC cars and other vehicles. This ESC features advanced technology that allows for smooth and precise control of the motor, making it perfect for high-speed racing or precision maneuvers. The 60A rating means that this ESC is suitable for use with large motors, making it a great choice for hobbyists who want to upgrade their RC car’s performance. Despite being used, this ESC is still in good condition and has been tested to ensure that it is functioning properly. HOBBYWING EZRUN TEKMODEL RC Brushless Motor 60A ESC (Used). This is 100% Brand new item and we can ship this item to worldwide.
Item State
Condition: Used
Performance: Good
Source: Shop Example Item
Length of Battery Wires: 130mm (approximately)
Length of Motor Wires: 95mm (approximately)
Oraginal Package: None
Product Manual: None
ESC Introduction
Condition: Used
Performance: Good
Source: Shop Example Item
Length of Battery Wires: 130mm (approximately)
Length of Motor Wires: 95mm (approximately)
Oraginal Package: None
Product Manual: None
ESC Introduction
Thanks for purchasing `eZRun` series Electronic Speed Controller (ESC). High power system for RC model can be very dangerous, so we strongly suggest you read this manual carefully. In that we have no control over the correct use, installation, application, or maintenance of our products, no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of the product. Any claims arising from the operating, failure of malfunctioning etc. will be denied. We assume no liability for personal injury, consequential damages resulting from our product or our workmanship. As far as is legally permitted, the obligation to compensation is limited to the invoice amount of the affect product.
?/FONT>
ESC Specifications
ESC Model: 60A-SL
Dimensions: 31.5mm x 27.5mm x 24mm
Continuous Current: 60A
Burst Current: 380A
Resistance: 0.0007 ohm
BEC Ouput: 6V/1.5A
Suitable Brushless Motor: >5.5T
Working Battery Types: 4 – 9 Cells (NiMh or Nicd), 2 – 3 Cells (Li-Po)
Working Voltage: 4.8 – 10.8V (NiMh or Nicd), 7.4 – 11.1V (Li-Po)
User Programmable: Available
Cable Type: 14 AWG (Battery and Motor)
Cable Length: 150mm (Battery and Motor), 210mm (Receiver)
Recommend Model: RC Model Car
ESC Model: 60A-SL
Dimensions: 31.5mm x 27.5mm x 24mm
Continuous Current: 60A
Burst Current: 380A
Resistance: 0.0007 ohm
BEC Ouput: 6V/1.5A
Suitable Brushless Motor: >5.5T
Working Battery Types: 4 – 9 Cells (NiMh or Nicd), 2 – 3 Cells (Li-Po)
Working Voltage: 4.8 – 10.8V (NiMh or Nicd), 7.4 – 11.1V (Li-Po)
User Programmable: Available
Cable Type: 14 AWG (Battery and Motor)
Cable Length: 150mm (Battery and Motor), 210mm (Receiver)
Recommend Model: RC Model Car
ESC Features
Specially designed for RC car, with excellent start-up, acceleration and linearity festures.
Compatible with sonsorless brushless motor.
Use top quality electronic components to enhance the current endurance ability of the ESC.
2 running modes (Racing mode and Forward/Backward mode).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
4 start modes (Also called `Punch`) from `soft` to `very aggressive`.
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment.
Easily program with only one button and compatible with pocket-sized program card.
Additional information
| Dimensions | 25 × 20 × 10 cm |
|---|
Reviews
There are no reviews yet.