No products in the cart.
HOBBYWING XERUN Black V2 RC Brushless Motor 120A ESC Speed Controller (Used)
Out Of Stock
Roll over image to zoom in
Click to open expanded view
Source: Shop Example Item
Length of Battery Wires: 190mm (approximately)
Length of Motor Wires: 190mm (approximately)
Dimension: 43mm(L) x 36mm(W) x 33mm(H)
Cont. / Burst Current: 120A / 760A
Resistance: 0.0003 ohm
Suitable Motor: Sensored and sensorless brushless motors
=>3.5T (on-road), =>5.5T(off-road) (Works with 5-6 NiMH or 2S Li-Po),
=>5.5T (on-road), =>8.5T(off-road) (Works with 8-9 NiMH or 3S Li-Po),
Battery: 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output: 5.75V/3A Built-in BEC
Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP, SpeedPassion, Novak, Etc.
Seamlessly change to sensorless working mode when the sensor cable is broken.
Excellent start-up, acceleration and linearity features.
Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).
User programmable. Easily programmed with the “SET” button on the ESC and also compatible with the digital LEDs Program Card and the advanced professional LCD Program Box.
3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
8 steps of timing adjustment to suitable for all brushless motors.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
|Dimensions||25 × 20 × 10 cm|