No products in the cart.
imaxRC Model B6 Pro Li-Polymer R/C Hobby Balance Digital Charger BC032
Roll over image to zoom in
Click to open expanded view
Thank you for interesting the B6 Pro Balance Charger from imaxRC. This product is a rapid charger with a high performance microprocessor and professional operating software.
Operating Voltage Range: DC 11 – 18V
Circuit Power: Max. charge power 50W / Max. discharge power 5W
Charge Current Range: 0.1 – 5A
Discharge Current Range: 0.1 – 1A
Current drain for balancing Li-po: 300mAh/cell
NiCd/NiMH battery cell count: 1 – 15 Cells
Li-ion/Polymer Cell Count: 1 – 6 Series
Pb Battery Voltage: 2 – 20V
Dimensions: 138mm x 75mm x 23mm
Packet Includes: Multifuctional Connector
Optimized operating software
B6 Pro Featuresthe so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the setting can be configured by users!
Internal independent lithium battery balancer
B6 Pro has an individual-cell-voltage voltage balancer. It is unnecessary to connect an external balancer for balance charging.
Balancing individual cell battery discharging
During the process of discharging, B6 Pro can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery
B6 Pro is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, `fast` charge reduce the duration of charging, whereas `store` state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit
You can set up the upper limit of charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the `AUTO` charging mode.
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
Processing time limit
You can also limit the maximum process time to avoid any possible defect.
Input power monitoring
To protect the car battery used as DC input power from being damaged, its voltage keeps being monitored. If it drops below the lower limit, the process will be ended automatically.
The maximum five batteries data can be stored for users convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. User can call out these data at any time without any special program setting.
1 to 5 cyclic and continuous process of charge>discharge or discharge >charge is operable for battery refreshing and Balancing to stimulate the battery activity.
Item Included: 1 x imaxRC Model B6 Pro Li-Polymer R/C Hobby Balance Digital Charger BC032